Maintenance [Yodelin Water]

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Maintenance ======

====== Annual ======
  * Clean the top of the [[locations:reservoir]]
  * Test the [[components:other:alarm_light]]. Lift the [[components:controls:reservoir_level_sensor|]] out of the tank, the alarm light should come on, and turn off when the sensor is returned.
  * Walk the neighborhood and inspect all [[components:valves:cabin_shutoff|]], [[components:valves:main_shutoff|]], and [[components:valves:blowoff|]] valves. Listen for leaks, clear any vegetation that could impede access, ensure [[components:other:valve_markers]] are properly located and upright.
  * Update [[https://doh.wa.gov/community-and-environment/drinking-water/regulation-and-compliance/water-facilities-inventory-wfi|Water Facilities Inventory Form]] by June 15th
====== Monthly ======
  * Record the pump hours and reservoir level.
  * Visually inspect the pump house for any damage or changes.
  * Check the level of the [[components:treatment:ph_treatment_tank|]]. Shine a bright light through the tank to see the level of the calcite. If it is low, schedule a service.