Differences

This shows you the differences between two versions of the page.

--- operations:maintenance [2026/07/03 20:16] – created zeagle
+++ operations:maintenance [2026/07/14 20:44] (current) – zeagle
@@ Line 4: / Line 4: @@
   * Clean the top of the [[locations:reservoir]]
   * Test the [[components:other:alarm_light]]. Lift the [[components:controls:reservoir_level_sensor|]] out of the tank, the alarm light should come on, and turn off when the sensor is returned.
-  * Walk the neighborhood and inspect all valve boxes. Listen for leaks, clear any vegetation that could impede access, ensure [[components:other:valve_markers]] are properly located and upright.
+  * Walk the neighborhood and inspect all [[components:valves:cabin_shutoff|]], [[components:valves:main_shutoff|]], and [[components:valves:blowoff|]] valves. Listen for leaks, clear any vegetation that could impede access, ensure [[components:other:valve_markers]] are properly located and upright.
+  * Update [[https://doh.wa.gov/community-and-environment/drinking-water/regulation-and-compliance/water-facilities-inventory-wfi|Water Facilities Inventory Form]] by June 15th
 ====== Monthly ======
   * Record the pump hours and reservoir level.
   * Visually inspect the pump house for any damage or changes.
+  * Check the level of the [[components:treatment:ph_treatment_tank|]]. Shine a bright light through the tank to see the level of the calcite. If it is low, schedule a service.