Show pageOld revisionsBacklinksAdd to bookExport to PDFODT exportBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ====== Mains Pressure Gauge ====== {{infobox> name = Mains Pressure Gauge image = components:mains_pressure_gauge.jpeg Location = [[locations:Pumphouse]] Installed = ~2006 Typical Reading = 20-24 PSI }} This is a manual pressure gauge that measures the water pressure in the distribution mains. If the pressure is at or near 0 PSI, the [[components:pumps:booster_pump_left|]] and [[components:pumps:booster_pump_right|]] should be shut off immediately and the [[operations:procedures:loss_of_pressure|]] procedure should be followed. components/gauges/mains_pressure_gauge.txt Last modified: 2026/07/03 21:02by zeagle