Differences

This shows you the differences between two versions of the page.

--- components:controls:control_box [2026/06/28 11:47] – zeagle
+++ components:controls:control_box [2026/07/14 20:21] (current) – zeagle
@@ Line 2: / Line 2: @@
 {{infobox>
 name = Control Box
-image = components:controlbox_face.jpeg
+image = :components:controlbox_face.jpeg
-Location = [[locations:Pumphouse]]
+Location = [[locations:pumphouse|]]
 Installed = ~2006
 }}
 ===== Purpose =====
-This is the brains of the operation. This control box runs the [[well pump]] and the [[high pressure pump left]] and [[high pressure pump right]]. This control box also contains the [[totalizer]] which shows the current flow out of the system and total amount of water used, both of which are key to determining if there is a leak in the system.
+This is the brains of the operation. This control box runs the [[..:pumps:well_pump|]] and the [[components:pumps:booster_pump_left|]] and [[components:pumps:booster_pump_right|]]. This control box also contains the [[totalizer]] which shows the current flow out of the system and total amount of water used, both of which are key to determining if there is a leak in the system.
 ----
 ===== Operation =====
-The [[well pump]] is programmed to turn on when the reservoir level drops below 13.2 feet, and will run continuously until the reservoir level reaches 13.8 feet.
+The [[components:pumps:well pump]] is programmed to turn on when the reservoir level drops below 13.2 feet, and will run continuously until the reservoir level reaches 13.8 feet.
 One of the high pressure pumps will turn on when the system pressure drops below 20psi and will run until the system reaches 26 psi (need to confirm those figures).
@@ Line 18: / Line 18: @@
 ---- struct data ----
+components.latitude  :
+components.longitude :
+components.type      :
 ----